Valkie
Gold Member
   
Offline

Australian Politics
Posts: 16142
Central Coast
Gender:
|
My second battery charger died today. I had just finished the work I was doing and went to recharge the batteries before I packed up. But the normal red flashy light, no flashy.. It no light up at all, no go flashy flashy.
Now, I don't buy cheap stuff for high use tools. Drills, circular saws, angle grinder, impact driver, torque driver are all Dewalt. And it's the Dewalt charger that has died twice. Sure, they replace them without argument or problem, but it's the inconvenience.
I have a couple of other cheaper low use tools and that charger has been going strong for years.
Apparently, the Dewalt is susceptible to surges. And a storm this afternoon may have contributed to it's demise. So now, I have to treat the charger, a supposedly robust and industrial tool, with kid gloves and be sure it's always unplugged.
May have to try Makita or Milwaukee tools next. I simply want reliability. I gave up on Ryobi and Bosch as unreliable.
Surprisingly, Ozito are quite robust, but not all that accurate. They also struggle a bit under load. You have to modify or replace the plastic parts with metal parts to make them better.
The Dewalt are definitely stronger and more accurate tools. If only their bloody chargers were better. I bought a spare charger, just in case.
I have an old Bunning special drill. Don't even know what it is, cost me 19 bucks 5 years ago. It's a piece of crap, I bought it to drill a couple of holes rather than drive home to get my good drill. It did the job, and I have grabbed it for dirty jobs where I know the drill is gonna cop a bad time. The reverse function no longer works and there is a dead spot on the trigger. It smokes and smells of burning plastic when you push it and it gets hot really quickly. I only use it connected through a power board ( don't trust it) But it's copped a flogging and still goes. I keep it for the hell of it, it outlasted my Ryobi which burnt out the motor in less than 3 months. I also have my old man's ancient Makita, it still runs quite well, but it's more a keepsake than a functional tool.
Anything The old tools.
|