Australian Politics Forum

Welcome, Guest. Please Login or Register

Forum rules, Recent posts (with text), RSS, Search options, Browse all uploaded images
Home, Articles, Green Tax Shift, Evolution,

Australian Politics Forum › Member Run Boards › The Tool Shed › tradetools

(Moderator: Redmond Neck)

‹ Previous Topic | Next Topic ›

Pages: 1

tradetools (Read 1344 times)

Sprintcyclist Gold Member Offline OzPolitic Posts: 41033 Gender:	tradetools Nov 18^th, 2016 at 8:38pm https://www.tradetools.com/product-range/hand-tools/sockets-and-sets/force-28pc-... FORCE 28PC 1/4 SOCKET SET METRIC AND IMPERIAL IN METAL
Back to top	Modern Classic Right Wing IP Logged

Redmond Neck Moderator Offline OzPolitic Posts: 22130 ACT Gender:	Re: tradetools Reply #1 - Nov 19^th, 2016 at 7:51am My old Sidchrome 1/4" socket set which I bought probably 30 years ago gets far more use than the others. Very handy addition to ones tool box. I have even added a 1/4" screw driver type handle to use with them which is useful at times.
Back to top	BAN ALL THESE ABO SITES RECOGNITIONS. ALL AUSTRALIA IS FOR ALL AUSTRALIANS! IP Logged

Baronvonrort Gold Member Offline Australian Politics Posts: 19534 Gender:	Re: tradetools Reply #2 - Nov 19^th, 2016 at 8:16am Metrinch are my favourite, they don't damage nuts and bolts they can even undo rounded ones. metrinch.tv
Back to top	Leftists and the Ayatollahs have a lot in common when it comes to criticism of Islam, they don't tolerate it. IP Logged

Redmond Neck

Moderator

Offline

OzPolitic

Posts: 22130
ACT
Gender: male

Re: tradetools
Reply #3 - Nov 19^th, 2016 at 8:37am

Baronvonrort wrote on Nov 19^th, 2016 at 8:16am:

Metrinch are my favourite, they don't damage nuts and bolts they can even undo rounded ones.

metrinch.tv

Interesting you say that as I always wondered if they would damage nuts as they dont grip the nut properly on the flat surfaces. Especially undoing rusted on nuts where a lot of pressure has to be applied.

BAN ALL THESE ABO SITES RECOGNITIONS.

ALL AUSTRALIA IS FOR ALL AUSTRALIANS!

IP Logged

Sprintcyclist

Gold Member

Offline

OzPolitic

Posts: 41033
Gender: male

Re: tradetools
Reply #4 - Nov 20^th, 2016 at 10:43am

Redmond Neck wrote on Nov 19^th, 2016 at 7:51am:

My old Sidchrome 1/4" socket set which I bought probably 30 years ago gets far more use than the others.

Very handy addition to ones tool box.

I have even added a 1/4" screw driver type handle to use with them which is useful at times.

yes, most bolts are suitable for 1/4" drive.

I bought an adaptor so can use the square drive socket set in my hex shaped electric screwdriver/ cordless drilldriver

Modern Classic Right Wing

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Forum

‹ Board

Top of this page